mostly happy with sway setup, not decided on status bar

.i3/status.conf

@@ -12,16 +12,16 @@ general {
 
   color_good = "#26F582"
   color_degraded = "#f4d430"
-  color_bad = "#EE6B6F"
+  color_bad = "#ddbb6f"
 }
 
 order += "disk /"
 order += "disk /var"
 order += "disk /home"
-order += "disk /media/driveBay"
+# order += "disk /media/driveBay"
-#order += "run_watch Docker"
+order += "run_watch Docker"
-#order += "run_watch DHCP"
+order += "run_watch DHCP"
-order += "path_exists VPN"
+# order += "path_exists VPN"
 #order += "ipv6"
 order += "wireless wlp3s0"
 order += "ethernet fschl-vpn"
@@ -29,6 +29,7 @@ order += "ethernet enp0s25"
 order += "volume Master"
 order += "battery 0"
 # order += "cpu_temperature 0"
+order += "memory"
 order += "load"
 #order += "tztime local"
 order += "tztime DE"
@@ -99,6 +100,11 @@ cpu_temperature 0 {
 	path = "/sys/devices/platform/coretemp.0/hwmon/hwmon1/temp1_input"
 }
 
+memory {
+        format = "RAM %used/%total"
+        #%free %total , %available avail, %used used"
+}
+
 disk "/" {
 	format = "/ %avail"
 }

README.org

@@ -13,6 +13,13 @@
      - Rescue+Recover friends laptops/computers
      - panic-ops using a friends laptop
 
+*** Firefox/Thunderbird customization
+
+    - goto ~.mozilla/firefox/<user-prrofile>/~
+    - ~mkdir chrome/ && cp ~/dotfiles/userChrome.css ./chrome/~
+    - open Firefox: ~about:config~ and set
+ ~toolkit.legacyUserProfileCustomizations.stylesheets~ to *true*
+
 *** Security
 
 **** Hardening ssh

alacritty.yml

@@ -0,0 +1,882 @@
+# Configuration for Alacritty, the GPU enhanced terminal emulator.
+
+# Import additional configuration files
+#
+# Imports are loaded in order, skipping all missing files, with the importing
+# file being loaded last. If a field is already present in a previous import, it
+# will be replaced.
+#
+# All imports must either be absolute paths starting with `/`, or paths relative
+# to the user's home directory starting with `~/`.
+#import:
+#  - /path/to/alacritty.yml
+
+# Any items in the `env` entry below will be added as
+# environment variables. Some entries may override variables
+# set by alacritty itself.
+#env:
+  # TERM variable
+  #
+  # This value is used to set the `$TERM` environment variable for
+  # each instance of Alacritty. If it is not present, alacritty will
+  # check the local terminfo database and use `alacritty` if it is
+  # available, otherwise `xterm-256color` is used.
+  #TERM: alacritty
+
+window:
+  # Window dimensions (changes require restart)
+  #
+  # Number of lines/columns (not pixels) in the terminal. The number of columns
+  # must be at least `2`, while using a value of `0` for columns and lines will
+  # fall back to the window manager's recommended size.
+  #dimensions:
+  #  columns: 0
+  #  lines: 0
+
+  # Window position (changes require restart)
+  #
+  # Specified in number of pixels.
+  # If the position is not set, the window manager will handle the placement.
+  #position:
+  #  x: 0
+  #  y: 0
+
+  # Window padding (changes require restart)
+  #
+  # Blank space added around the window in pixels. This padding is scaled
+  # by DPI and the specified value is always added at both opposing sides.
+  #padding:
+  #  x: 0
+  #  y: 0
+
+  # Spread additional padding evenly around the terminal content.
+  #dynamic_padding: false
+
+  # Window decorations
+  #
+  # Values for `decorations`:
+  #     - full: Borders and title bar
+  #     - none: Neither borders nor title bar
+  #
+  # Values for `decorations` (macOS only):
+  #     - transparent: Title bar, transparent background and title bar buttons
+  #     - buttonless: Title bar, transparent background and no title bar buttons
+  decorations: none
+
+  # Startup Mode (changes require restart)
+  #
+  # Values for `startup_mode`:
+  #   - Windowed
+  #   - Maximized
+  #   - Fullscreen
+  #
+  # Values for `startup_mode` (macOS only):
+  #   - SimpleFullscreen
+  #startup_mode: Windowed
+
+  # Window title
+  #title: Alacritty
+
+  # Allow terminal applications to change Alacritty's window title.
+  #dynamic_title: true
+
+  # Window class (Linux/BSD only):
+  #class:
+    # Application instance name
+    #instance: Alacritty
+    # General application class
+    #general: Alacritty
+
+  # GTK theme variant (Linux/BSD only)
+  #
+  # Override the variant of the GTK theme. Commonly supported values are `dark`
+  # and `light`. Set this to `None` to use the default theme variant.
+  #gtk_theme_variant: None
+
+#scrolling:
+  # Maximum number of lines in the scrollback buffer.
+  # Specifying '0' will disable scrolling.
+  #history: 10000
+
+  # Scrolling distance multiplier.
+  #multiplier: 3
+
+# Font configuration
+font:
+  # Normal (roman) font face
+  #normal:
+    # Font family
+    #
+    # Default:
+    #   - (macOS) Menlo
+    #   - (Linux/BSD) monospace
+    #   - (Windows) Consolas
+    #family: monospace
+
+    # The `style` can be specified to pick a specific face.
+    #style: Regular
+
+  # Bold font face
+  #bold:
+    # Font family
+    #
+    # If the bold family is not specified, it will fall back to the
+    # value specified for the normal font.
+    #family: monospace
+
+    # The `style` can be specified to pick a specific face.
+    #style: Bold
+
+  # Italic font face
+  #italic:
+    # Font family
+    #
+    # If the italic family is not specified, it will fall back to the
+    # value specified for the normal font.
+    #family: monospace
+
+    # The `style` can be specified to pick a specific face.
+    #style: Italic
+
+  # Bold italic font face
+  #bold_italic:
+    # Font family
+    #
+    # If the bold italic family is not specified, it will fall back to the
+    # value specified for the normal font.
+    #family: monospace
+
+    # The `style` can be specified to pick a specific face.
+    #style: Bold Italic
+
+  # Point size
+  size: 9.0
+
+  # Offset is the extra space around each character. `offset.y` can be thought
+  # of as modifying the line spacing, and `offset.x` as modifying the letter
+  # spacing.
+  #offset:
+  #  x: 0
+  #  y: 0
+
+  # Glyph offset determines the locations of the glyphs within their cells with
+  # the default being at the bottom. Increasing `x` moves the glyph to the
+  # right, increasing `y` moves the glyph upward.
+  #glyph_offset:
+  #  x: 0
+  #  y: 0
+
+  # Thin stroke font rendering (macOS only)
+  #
+  # Thin strokes are suitable for retina displays, but for non-retina screens
+  # it is recommended to set `use_thin_strokes` to `false`.
+  #use_thin_strokes: true
+
+# If `true`, bold text is drawn using the bright color variants.
+#draw_bold_text_with_bright_colors: false
+
+# Colors (Solarized Dark)
+colors:
+  # Default colors
+  primary:
+    # background: '0x002b36'
+    background: '0x001b26'
+    foreground: '0x839496'
+
+    # Normal colors
+    normal:
+      black:   '0x073642'
+      red:     '0xdc322f'
+      green:   '0x859900'
+      yellow:  '0xb58900'
+      blue:    '0x268bd2'
+      magenta: '0xd33682'
+      cyan:    '0x2aa198'
+      white:   '0xeee8d5'
+
+      # Bright colors
+      bright:
+        black:   '0x002b36'
+        red:     '0xcb4b16'
+        green:   '0x586e75'
+        yellow:  '0x657b83'
+        blue:    '0x839496'
+        magenta: '0x6c71c4'
+        cyan:    '0x93a1a1'
+        white:   '0x
+
+# Colors (Tomorrow Night)
+#colors:
+  # Default colors
+  #primary:
+  #  background: '#1d1f21'
+  #  foreground: '#c5c8c6'
+
+    # Bright and dim foreground colors
+    #
+    # The dimmed foreground color is calculated automatically if it is not
+    # present. If the bright foreground color is not set, or
+    # `draw_bold_text_with_bright_colors` is `false`, the normal foreground
+    # color will be used.
+    #dim_foreground: '#828482'
+    #bright_foreground: '#eaeaea'
+
+  # Cursor colors
+  #
+  # Colors which should be used to draw the terminal cursor.
+  #
+  # Allowed values are CellForeground/CellBackground, which reference the
+  # affected cell, or hexadecimal colors like #ff00ff.
+  #cursor:
+  #  text: CellBackground
+  #  cursor: CellForeground
+
+  # Vi mode cursor colors
+  #
+  # Colors for the cursor when the vi mode is active.
+  #
+  # Allowed values are CellForeground/CellBackground, which reference the
+  # affected cell, or hexadecimal colors like #ff00ff.
+  #vi_mode_cursor:
+  #  text: CellBackground
+  #  cursor: CellForeground
+
+  # Search colors
+  #
+  # Colors used for the search bar and match highlighting.
+  #search:
+    # Allowed values are CellForeground/CellBackground, which reference the
+    # affected cell, or hexadecimal colors like #ff00ff.
+    #matches:
+    #  foreground: '#000000'
+    #  background: '#ffffff'
+    #focused_match:
+    #  foreground: '#ffffff'
+    #  background: '#000000'
+
+    #bar:
+    #  background: '#c5c8c6'
+    #  foreground: '#1d1f21'
+
+  # Keyboard regex hints
+  #hints:
+    # First character in the hint label
+    #
+    # Allowed values are CellForeground/CellBackground, which reference the
+    # affected cell, or hexadecimal colors like #ff00ff.
+    #start:
+    #  foreground: '#1d1f21'
+    #  background: '#e9ff5e'
+
+    # All characters after the first one in the hint label
+    #
+    # Allowed values are CellForeground/CellBackground, which reference the
+    # affected cell, or hexadecimal colors like #ff00ff.
+    #end:
+    #  foreground: '#e9ff5e'
+    #  background: '#1d1f21'
+
+  # Line indicator
+  #
+  # Color used for the indicator displaying the position in history during
+  # search and vi mode.
+  #
+  # By default, these will use the opposing primary color.
+  #line_indicator:
+  #  foreground: None
+  #  background: None
+
+  # Selection colors
+  #
+  # Colors which should be used to draw the selection area.
+  #
+  # Allowed values are CellForeground/CellBackground, which reference the
+  # affected cell, or hexadecimal colors like #ff00ff.
+  #selection:
+  #  text: CellBackground
+  #  background: CellForeground
+
+  # Normal colors
+  #normal:
+  #  black:   '#1d1f21'
+  #  red:     '#cc6666'
+  #  green:   '#b5bd68'
+  #  yellow:  '#f0c674'
+  #  blue:    '#81a2be'
+  #  magenta: '#b294bb'
+  #  cyan:    '#8abeb7'
+  #  white:   '#c5c8c6'
+
+  # Bright colors
+  #bright:
+  #  black:   '#666666'
+  #  red:     '#d54e53'
+  #  green:   '#b9ca4a'
+  #  yellow:  '#e7c547'
+  #  blue:    '#7aa6da'
+  #  magenta: '#c397d8'
+  #  cyan:    '#70c0b1'
+  #  white:   '#eaeaea'
+
+  # Dim colors
+  #
+  # If the dim colors are not set, they will be calculated automatically based
+  # on the `normal` colors.
+  #dim:
+  #  black:   '#131415'
+  #  red:     '#864343'
+  #  green:   '#777c44'
+  #  yellow:  '#9e824c'
+  #  blue:    '#556a7d'
+  #  magenta: '#75617b'
+  #  cyan:    '#5b7d78'
+  #  white:   '#828482'
+
+  # Indexed Colors
+  #
+  # The indexed colors include all colors from 16 to 256.
+  # When these are not set, they're filled with sensible defaults.
+  #
+  # Example:
+  #   `- { index: 16, color: '#ff00ff' }`
+  #
+  #indexed_colors: []
+
+# Bell
+#
+# The bell is rung every time the BEL control character is received.
+#bell:
+  # Visual Bell Animation
+  #
+  # Animation effect for flashing the screen when the visual bell is rung.
+  #
+  # Values for `animation`:
+  #   - Ease
+  #   - EaseOut
+  #   - EaseOutSine
+  #   - EaseOutQuad
+  #   - EaseOutCubic
+  #   - EaseOutQuart
+  #   - EaseOutQuint
+  #   - EaseOutExpo
+  #   - EaseOutCirc
+  #   - Linear
+  #animation: EaseOutExpo
+
+  # Duration of the visual bell flash in milliseconds. A `duration` of `0` will
+  # disable the visual bell animation.
+  #duration: 0
+
+  # Visual bell animation color.
+  #color: '#ffffff'
+
+  # Bell Command
+  #
+  # This program is executed whenever the bell is rung.
+  #
+  # When set to `command: None`, no command will be executed.
+  #
+  # Example:
+  #   command:
+  #     program: notify-send
+  #     args: ["Hello, World!"]
+  #
+  #command: None
+
+# Background opacity
+#
+# Window opacity as a floating point number from `0.0` to `1.0`.
+# The value `0.0` is completely transparent and `1.0` is opaque.
+background_opacity: 0.95
+
+#selection:
+  # This string contains all characters that are used as separators for
+  # "semantic words" in Alacritty.
+  #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"
+
+  # When set to `true`, selected text will be copied to the primary clipboard.
+  #save_to_clipboard: false
+
+#cursor:
+  # Cursor style
+  #style:
+    # Cursor shape
+    #
+    # Values for `shape`:
+    #   - ▇ Block
+    #   - _ Underline
+    #   - | Beam
+    #shape: Block
+
+    # Cursor blinking state
+    #
+    # Values for `blinking`:
+    #   - Never: Prevent the cursor from ever blinking
+    #   - Off: Disable blinking by default
+    #   - On: Enable blinking by default
+    #   - Always: Force the cursor to always blink
+    #blinking: Off
+
+  # Vi mode cursor style
+  #
+  # If the vi mode cursor style is `None` or not specified, it will fall back to
+  # the style of the active value of the normal cursor.
+  #
+  # See `cursor.style` for available options.
+  #vi_mode_style: None
+
+  # Cursor blinking interval in milliseconds.
+  #blink_interval: 750
+
+  # If this is `true`, the cursor will be rendered as a hollow box when the
+  # window is not focused.
+  #unfocused_hollow: true
+
+  # Thickness of the cursor relative to the cell width as floating point number
+  # from `0.0` to `1.0`.
+  #thickness: 0.15
+
+# Live config reload (changes require restart)
+#live_config_reload: true
+
+# Shell
+#
+# You can set `shell.program` to the path of your favorite shell, e.g.
+# `/bin/fish`. Entries in `shell.args` are passed unmodified as arguments to the
+# shell.
+#
+# Default:
+#   - (macOS) /bin/bash --login
+#   - (Linux/BSD) user login shell
+#   - (Windows) powershell
+shell:
+ program: /bin/bash
+ args:
+   - --login
+
+# Startup directory
+#
+# Directory the shell is started in. If this is unset, or `None`, the working
+# directory of the parent process will be used.
+#working_directory: None
+
+# Send ESC (\x1b) before characters when alt is pressed.
+#alt_send_esc: true
+
+mouse:
+  # Click settings
+  #
+  # The `double_click` and `triple_click` settings control the time
+  # alacritty should wait for accepting multiple clicks as one double
+  # or triple click.
+  #double_click: { threshold: 300 }
+  #triple_click: { threshold: 300 }
+
+  # If this is `true`, the cursor is temporarily hidden when typing.
+  hide_when_typing: true
+
+# Regex hints
+#
+# Terminal hints can be used to find text in the visible part of the terminal
+# and pipe it to other applications.
+#hints:
+  # Keys used for the hint labels.
+  #alphabet: "jfkdls;ahgurieowpq"
+
+  # List with all available hints
+  #
+  # Each hint must have a `regex` and either an `action` or a `command` field.
+  # The fields `mouse`, `binding` and `post_processing` are optional.
+  #
+  # The fields `command`, `binding.key`, `binding.mods`, `binding.mode` and
+  # `mouse.mods` accept the same values as they do in the `key_bindings` section.
+  #
+  # The `mouse.enabled` field controls if the hint should be underlined while
+  # the mouse with all `mouse.mods` keys held or the vi mode cursor is above it.
+  #
+  # If the `post_processing` field is set to `true`, heuristics will be used to
+  # shorten the match if there are characters likely not to be part of the hint
+  # (e.g. a trailing `.`). This is most useful for URIs.
+  #
+  # Values for `action`:
+  #   - Copy
+  #       Copy the hint's text to the clipboard.
+  #   - Paste
+  #       Paste the hint's text to the terminal or search.
+  #   - Select
+  #       Select the hint's text.
+  #   - MoveViModeCursor
+  #       Move the vi mode cursor to the beginning of the hint.
+  #enabled:
+  # - regex: "(ipfs:|ipns:|magnet:|mailto:|gemini:|gopher:|https:|http:|news:|file:|git:|ssh:|ftp:)\
+  #           [^\u0000-\u001F\u007F-\u009F<>\"\\s{-}\\^⟨⟩`]+"
+  #   command: xdg-open
+  #   post_processing: true
+  #   mouse:
+  #     enabled: true
+  #     mods: None
+  #   binding:
+  #     key: U
+  #     mods: Control|Shift
+
+# Mouse bindings
+#
+# Mouse bindings are specified as a list of objects, much like the key
+# bindings further below.
+#
+# To trigger mouse bindings when an application running within Alacritty
+# captures the mouse, the `Shift` modifier is automatically added as a
+# requirement.
+#
+# Each mouse binding will specify a:
+#
+# - `mouse`:
+#
+#   - Middle
+#   - Left
+#   - Right
+#   - Numeric identifier such as `5`
+#
+# - `action` (see key bindings)
+#
+# And optionally:
+#
+# - `mods` (see key bindings)
+#mouse_bindings:
+#  - { mouse: Middle, action: PasteSelection }
+
+# Key bindings
+#
+# Key bindings are specified as a list of objects. For example, this is the
+# default paste binding:
+#
+# `- { key: V, mods: Control|Shift, action: Paste }`
+#
+# Each key binding will specify a:
+#
+# - `key`: Identifier of the key pressed
+#
+#    - A-Z
+#    - F1-F24
+#    - Key0-Key9
+#
+#    A full list with available key codes can be found here:
+#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
+#
+#    Instead of using the name of the keys, the `key` field also supports using
+#    the scancode of the desired key. Scancodes have to be specified as a
+#    decimal number. This command will allow you to display the hex scancodes
+#    for certain keys:
+#
+#       `showkey --scancodes`.
+#
+# Then exactly one of:
+#
+# - `chars`: Send a byte sequence to the running application
+#
+#    The `chars` field writes the specified string to the terminal. This makes
+#    it possible to pass escape sequences. To find escape codes for bindings
+#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
+#    of tmux. Note that applications use terminfo to map escape sequences back
+#    to keys. It is therefore required to update the terminfo when changing an
+#    escape sequence.
+#
+# - `action`: Execute a predefined action
+#
+#   - ToggleViMode
+#   - SearchForward
+#       Start searching toward the right of the search origin.
+#   - SearchBackward
+#       Start searching toward the left of the search origin.
+#   - Copy
+#   - Paste
+#   - IncreaseFontSize
+#   - DecreaseFontSize
+#   - ResetFontSize
+#   - ScrollPageUp
+#   - ScrollPageDown
+#   - ScrollHalfPageUp
+#   - ScrollHalfPageDown
+#   - ScrollLineUp
+#   - ScrollLineDown
+#   - ScrollToTop
+#   - ScrollToBottom
+#   - ClearHistory
+#       Remove the terminal's scrollback history.
+#   - Hide
+#       Hide the Alacritty window.
+#   - Minimize
+#       Minimize the Alacritty window.
+#   - Quit
+#       Quit Alacritty.
+#   - ToggleFullscreen
+#   - SpawnNewInstance
+#       Spawn a new instance of Alacritty.
+#   - ClearLogNotice
+#       Clear Alacritty's UI warning and error notice.
+#   - ClearSelection
+#       Remove the active selection.
+#   - ReceiveChar
+#   - None
+#
+# - Vi mode exclusive actions:
+#
+#   - Open
+#       Perform the action of the first matching hint under the vi mode cursor
+#       with `mouse.enabled` set to `true`.
+#   - ToggleNormalSelection
+#   - ToggleLineSelection
+#   - ToggleBlockSelection
+#   - ToggleSemanticSelection
+#       Toggle semantic selection based on `selection.semantic_escape_chars`.
+#
+# - Vi mode exclusive cursor motion actions:
+#
+#   - Up
+#       One line up.
+#   - Down
+#       One line down.
+#   - Left
+#       One character left.
+#   - Right
+#       One character right.
+#   - First
+#       First column, or beginning of the line when already at the first column.
+#   - Last
+#       Last column, or beginning of the line when already at the last column.
+#   - FirstOccupied
+#       First non-empty cell in this terminal row, or first non-empty cell of
+#       the line when already at the first cell of the row.
+#   - High
+#       Top of the screen.
+#   - Middle
+#       Center of the screen.
+#   - Low
+#       Bottom of the screen.
+#   - SemanticLeft
+#       Start of the previous semantically separated word.
+#   - SemanticRight
+#       Start of the next semantically separated word.
+#   - SemanticLeftEnd
+#       End of the previous semantically separated word.
+#   - SemanticRightEnd
+#       End of the next semantically separated word.
+#   - WordLeft
+#       Start of the previous whitespace separated word.
+#   - WordRight
+#       Start of the next whitespace separated word.
+#   - WordLeftEnd
+#       End of the previous whitespace separated word.
+#   - WordRightEnd
+#       End of the next whitespace separated word.
+#   - Bracket
+#       Character matching the bracket at the cursor's location.
+#   - SearchNext
+#       Beginning of the next match.
+#   - SearchPrevious
+#       Beginning of the previous match.
+#   - SearchStart
+#       Start of the match to the left of the vi mode cursor.
+#   - SearchEnd
+#       End of the match to the right of the vi mode cursor.
+#
+# - Search mode exclusive actions:
+#   - SearchFocusNext
+#       Move the focus to the next search match.
+#   - SearchFocusPrevious
+#       Move the focus to the previous search match.
+#   - SearchConfirm
+#   - SearchCancel
+#   - SearchClear
+#       Reset the search regex.
+#   - SearchDeleteWord
+#       Delete the last word in the search regex.
+#   - SearchHistoryPrevious
+#       Go to the previous regex in the search history.
+#   - SearchHistoryNext
+#       Go to the next regex in the search history.
+#
+# - macOS exclusive actions:
+#   - ToggleSimpleFullscreen
+#       Enter fullscreen without occupying another space.
+#
+# - Linux/BSD exclusive actions:
+#
+#   - CopySelection
+#       Copy from the selection buffer.
+#   - PasteSelection
+#       Paste from the selection buffer.
+#
+# - `command`: Fork and execute a specified command plus arguments
+#
+#    The `command` field must be a map containing a `program` string and an
+#    `args` array of command line parameter strings. For example:
+#       `{ program: "alacritty", args: ["-e", "vttest"] }`
+#
+# And optionally:
+#
+# - `mods`: Key modifiers to filter binding actions
+#
+#    - Command
+#    - Control
+#    - Option
+#    - Super
+#    - Shift
+#    - Alt
+#
+#    Multiple `mods` can be combined using `|` like this:
+#       `mods: Control|Shift`.
+#    Whitespace and capitalization are relevant and must match the example.
+#
+# - `mode`: Indicate a binding for only specific terminal reported modes
+#
+#    This is mainly used to send applications the correct escape sequences
+#    when in different modes.
+#
+#    - AppCursor
+#    - AppKeypad
+#    - Search
+#    - Alt
+#    - Vi
+#
+#    A `~` operator can be used before a mode to apply the binding whenever
+#    the mode is *not* active, e.g. `~Alt`.
+#
+# Bindings are always filled by default, but will be replaced when a new
+# binding with the same triggers is defined. To unset a default binding, it can
+# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
+# a no-op if you do not wish to receive input characters for that binding.
+#
+# If the same trigger is assigned to multiple actions, all of them are executed
+# in the order they were defined in.
+#key_bindings:
+  #- { key: Paste,                                       action: Paste          }
+  #- { key: Copy,                                        action: Copy           }
+  #- { key: L,         mods: Control,                    action: ClearLogNotice }
+  #- { key: L,         mods: Control, mode: ~Vi|~Search, chars: "\x0c"          }
+  #- { key: PageUp,    mods: Shift,   mode: ~Alt,        action: ScrollPageUp,  }
+  #- { key: PageDown,  mods: Shift,   mode: ~Alt,        action: ScrollPageDown }
+  #- { key: Home,      mods: Shift,   mode: ~Alt,        action: ScrollToTop,   }
+  #- { key: End,       mods: Shift,   mode: ~Alt,        action: ScrollToBottom }
+
+  # Vi Mode
+  #- { key: Space,  mods: Shift|Control, mode: ~Search,    action: ToggleViMode            }
+  #- { key: Space,  mods: Shift|Control, mode: Vi|~Search, action: ScrollToBottom          }
+  #- { key: Escape,                      mode: Vi|~Search, action: ClearSelection          }
+  #- { key: I,                           mode: Vi|~Search, action: ToggleViMode            }
+  #- { key: I,                           mode: Vi|~Search, action: ScrollToBottom          }
+  #- { key: C,      mods: Control,       mode: Vi|~Search, action: ToggleViMode            }
+  #- { key: Y,      mods: Control,       mode: Vi|~Search, action: ScrollLineUp            }
+  #- { key: E,      mods: Control,       mode: Vi|~Search, action: ScrollLineDown          }
+  #- { key: G,                           mode: Vi|~Search, action: ScrollToTop             }
+  #- { key: G,      mods: Shift,         mode: Vi|~Search, action: ScrollToBottom          }
+  #- { key: B,      mods: Control,       mode: Vi|~Search, action: ScrollPageUp            }
+  #- { key: F,      mods: Control,       mode: Vi|~Search, action: ScrollPageDown          }
+  #- { key: U,      mods: Control,       mode: Vi|~Search, action: ScrollHalfPageUp        }
+  #- { key: D,      mods: Control,       mode: Vi|~Search, action: ScrollHalfPageDown      }
+  #- { key: Y,                           mode: Vi|~Search, action: Copy                    }
+  #- { key: Y,                           mode: Vi|~Search, action: ClearSelection          }
+  #- { key: Copy,                        mode: Vi|~Search, action: ClearSelection          }
+  #- { key: V,                           mode: Vi|~Search, action: ToggleNormalSelection   }
+  #- { key: V,      mods: Shift,         mode: Vi|~Search, action: ToggleLineSelection     }
+  #- { key: V,      mods: Control,       mode: Vi|~Search, action: ToggleBlockSelection    }
+  #- { key: V,      mods: Alt,           mode: Vi|~Search, action: ToggleSemanticSelection }
+  #- { key: Return,                      mode: Vi|~Search, action: Open                    }
+  #- { key: K,                           mode: Vi|~Search, action: Up                      }
+  #- { key: J,                           mode: Vi|~Search, action: Down                    }
+  #- { key: H,                           mode: Vi|~Search, action: Left                    }
+  #- { key: L,                           mode: Vi|~Search, action: Right                   }
+  #- { key: Up,                          mode: Vi|~Search, action: Up                      }
+  #- { key: Down,                        mode: Vi|~Search, action: Down                    }
+  #- { key: Left,                        mode: Vi|~Search, action: Left                    }
+  #- { key: Right,                       mode: Vi|~Search, action: Right                   }
+  #- { key: Key0,                        mode: Vi|~Search, action: First                   }
+  #- { key: Key4,   mods: Shift,         mode: Vi|~Search, action: Last                    }
+  #- { key: Key6,   mods: Shift,         mode: Vi|~Search, action: FirstOccupied           }
+  #- { key: H,      mods: Shift,         mode: Vi|~Search, action: High                    }
+  #- { key: M,      mods: Shift,         mode: Vi|~Search, action: Middle                  }
+  #- { key: L,      mods: Shift,         mode: Vi|~Search, action: Low                     }
+  #- { key: B,                           mode: Vi|~Search, action: SemanticLeft            }
+  #- { key: W,                           mode: Vi|~Search, action: SemanticRight           }
+  #- { key: E,                           mode: Vi|~Search, action: SemanticRightEnd        }
+  #- { key: B,      mods: Shift,         mode: Vi|~Search, action: WordLeft                }
+  #- { key: W,      mods: Shift,         mode: Vi|~Search, action: WordRight               }
+  #- { key: E,      mods: Shift,         mode: Vi|~Search, action: WordRightEnd            }
+  #- { key: Key5,   mods: Shift,         mode: Vi|~Search, action: Bracket                 }
+  #- { key: Slash,                       mode: Vi|~Search, action: SearchForward           }
+  #- { key: Slash,  mods: Shift,         mode: Vi|~Search, action: SearchBackward          }
+  #- { key: N,                           mode: Vi|~Search, action: SearchNext              }
+  #- { key: N,      mods: Shift,         mode: Vi|~Search, action: SearchPrevious          }
+
+  # Search Mode
+  #- { key: Return,                mode: Search|Vi,  action: SearchConfirm         }
+  #- { key: Escape,                mode: Search,     action: SearchCancel          }
+  #- { key: C,      mods: Control, mode: Search,     action: SearchCancel          }
+  #- { key: U,      mods: Control, mode: Search,     action: SearchClear           }
+  #- { key: W,      mods: Control, mode: Search,     action: SearchDeleteWord      }
+  #- { key: P,      mods: Control, mode: Search,     action: SearchHistoryPrevious }
+  #- { key: N,      mods: Control, mode: Search,     action: SearchHistoryNext     }
+  #- { key: Up,                    mode: Search,     action: SearchHistoryPrevious }
+  #- { key: Down,                  mode: Search,     action: SearchHistoryNext     }
+  #- { key: Return,                mode: Search|~Vi, action: SearchFocusNext       }
+  #- { key: Return, mods: Shift,   mode: Search|~Vi, action: SearchFocusPrevious   }
+
+  # (Windows, Linux, and BSD only)
+  #- { key: V,              mods: Control|Shift, mode: ~Vi,        action: Paste            }
+  #- { key: C,              mods: Control|Shift,                   action: Copy             }
+  #- { key: F,              mods: Control|Shift, mode: ~Search,    action: SearchForward    }
+  #- { key: B,              mods: Control|Shift, mode: ~Search,    action: SearchBackward   }
+  #- { key: C,              mods: Control|Shift, mode: Vi|~Search, action: ClearSelection   }
+  #- { key: Insert,         mods: Shift,                           action: PasteSelection   }
+  #- { key: Key0,           mods: Control,                         action: ResetFontSize    }
+  #- { key: Equals,         mods: Control,                         action: IncreaseFontSize }
+  #- { key: Plus,           mods: Control,                         action: IncreaseFontSize }
+  #- { key: NumpadAdd,      mods: Control,                         action: IncreaseFontSize }
+  #- { key: Minus,          mods: Control,                         action: DecreaseFontSize }
+  #- { key: NumpadSubtract, mods: Control,                         action: DecreaseFontSize }
+
+  # (Windows only)
+  #- { key: Return,   mods: Alt,           action: ToggleFullscreen }
+
+  # (macOS only)
+  #- { key: K,              mods: Command, mode: ~Vi|~Search, chars: "\x0c"                 }
+  #- { key: K,              mods: Command, mode: ~Vi|~Search, action: ClearHistory          }
+  #- { key: Key0,           mods: Command,                    action: ResetFontSize         }
+  #- { key: Equals,         mods: Command,                    action: IncreaseFontSize      }
+  #- { key: Plus,           mods: Command,                    action: IncreaseFontSize      }
+  #- { key: NumpadAdd,      mods: Command,                    action: IncreaseFontSize      }
+  #- { key: Minus,          mods: Command,                    action: DecreaseFontSize      }
+  #- { key: NumpadSubtract, mods: Command,                    action: DecreaseFontSize      }
+  #- { key: V,              mods: Command,                    action: Paste                 }
+  #- { key: C,              mods: Command,                    action: Copy                  }
+  #- { key: C,              mods: Command, mode: Vi|~Search,  action: ClearSelection        }
+  #- { key: H,              mods: Command,                    action: Hide                  }
+  #- { key: H,              mods: Command|Alt,                action: HideOtherApplications }
+  #- { key: M,              mods: Command,                    action: Minimize              }
+  #- { key: Q,              mods: Command,                    action: Quit                  }
+  #- { key: W,              mods: Command,                    action: Quit                  }
+  #- { key: N,              mods: Command,                    action: SpawnNewInstance      }
+  #- { key: F,              mods: Command|Control,            action: ToggleFullscreen      }
+  #- { key: F,              mods: Command, mode: ~Search,     action: SearchForward         }
+  #- { key: B,              mods: Command, mode: ~Search,     action: SearchBackward        }
+
+#debug:
+  # Display the time it takes to redraw each frame.
+  #render_timer: false
+
+  # Keep the log file after quitting Alacritty.
+  #persistent_logging: false
+
+  # Log level
+  #
+  # Values for `log_level`:
+  #   - Off
+  #   - Error
+  #   - Warn
+  #   - Info
+  #   - Debug
+  #   - Trace
+  #log_level: Warn
+
+  # Print all received window events.
+  #print_events: false

scripts/install.sh

@@ -61,6 +61,7 @@ base_applications() {
         apt-transport-https \
         automake \
         bash-completion \
+        bat \
         bmon \
         bzip2 \
         ca-certificates \
@@ -69,6 +70,7 @@ base_applications() {
         cryptsetup \
         curl \
         dnsutils \
+        fzf \
         gcc \
         git \
         gnupg \
@@ -82,6 +84,8 @@ base_applications() {
         make \
         mount \
         net-tools \
+        restic \
+        ripgrep \
         rsync \
         ssh \
         sudo \
@@ -103,7 +107,8 @@ base_applications() {
     $SUDO apt autoclean
     $SUDO apt clean
 
-    $SUDO ip link add dev wg0 type wireguard
+    restic self-update
+
 }
 
 install_server_base() {
@@ -194,9 +199,9 @@ install_workstation_apps() {
 
     DEBIAN_FRONTEND=noninteractive
 
-    # TODO add non-free to apt/sources.list
     apt update
     apt install -y \
+        alsa-tools \
         alsa-utils \
         aspell \
         aspell-de \
@@ -221,12 +226,10 @@ install_workstation_apps() {
         libreoffice-writer \
         ntfs-3g \
         nmap \
-        pulseaudio \
+        fonts-powerline \
-        slim \
         thunderbird \
         thunderbird-l10n-de \
         thunderbird-l10n-en-gb \
-        vlc \
         --no-install-recommends
 
     TARGET="/home/$USERNAME/.emacs.d"
@@ -237,25 +240,32 @@ install_workstation_apps() {
 }
 
 install_sway() {
-    echo ".... TODO ;-) ..."
+    echo " installing sway and wayland tools..."
+    DEBIAN_FRONTEND=noninteractive
+    apt update
+    apt install -y \
+        brightnessctl \
+        dunst \
+        sway \
+        wl-clipboard \
+        wob \
+        wofi \
+        ydotool \
+        --no-install-recommends
+
+    rm /home/${USERNAME}/.bashrc
+    ln -s /home/${USERNAME}/
+
 }
 
 install_i3() {
-    echo "update and installing i3wm and some tools..."
+    echo "Xorg with i3wm and some tools..."
 
     # check if CJK and other eastern letters are displayed correctly:
     # https://meta.wikimedia.org/wiki/List_of_Wikipedias
 
-    # tlp: Advanced Linux Power Management
-    # http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html
-    # deb http://repo.linrunner.de/debian sid main
-
-    # add the tlp apt-repo gpg key
-    # apt-key adv --keyserver pool.sks-keyservers.net --recv-keys CD4E8809
-
     DEBIAN_FRONTEND=noninteractive
 
-    # TODO add non-free to apt/sources.list
     apt update
     apt install -y \
         feh \
@@ -276,6 +286,7 @@ install_i3() {
         shotwell \
         slim \
         vlc \
+        xdotool \
         xorg \
         --no-install-recommends
 
@@ -378,7 +389,7 @@ install_compose() {
     # https://github.com/docker/compose/releases
     # btw: *not* for raspbian! you got 3 choices: hypriot, install via pip or build yourself
     # https://www.berthon.eu/2017/getting-docker-compose-on-raspberry-pi-arm-the-easy-way/
-    VERS="1.28.6"
+    VERS="1.29.2"
     FILE="docker-compose-$(uname -s)-$(uname -m)"
     echo "installing docker-compose $VERS ... curling from github"
 
@@ -412,17 +423,6 @@ install_virtualbox() {
 
 }
 
-get_dotfiles() {
-
-    (
-        # git clone https://gitlab.com/fschl/dotfiles.git "/home/$USERNAME/dotfiles"
-        # cd "/home/$USERNAME/dotfiles" && make
-
-        # TODO: propbably dont really need the whole repo
-        git clone https://gitlab.com/fschl/dockerfiles.git "/home/$USERNAME/dockerfiles"
-    )
-}
-
 # install/update golang from source
 install_golang() {
     export GO_VERSION=1.16.0
@@ -440,40 +440,66 @@ install_golang() {
 }
 
 install_rust() {
-    echo ".... TODO ! rustup.sh ... "
+    echo "... rustup.sh ... "
+    curl --proto 'https' --tlsv1.2 https://sh.rustup.rs | sh
+
+    eco "... adding dependencies for alacritty and i3status-rs ... "
+    sudo apt install -y \
+         cmake \
+         fonts-font-awesome \
+         gcc \
+         pkg-config \
+         libdbus-1-dev \
+         libfreetype6-dev \
+         libfontconfig1-dev \
+         libssl-dev \
+         libxcb-xfixes0-dev \
+         libxkbcommon-dev \
+         python3 \
+         --no-install-recommends
+
+    # for whatever reason alacritty is not available in debian repos
+    cargo install alacritty
+    cargo install du-dust
+
+    (
+        mkdir -p "/home/$USERNAME/projects"
+        TARGET="/home/$USERNAME/projects/i3status-rust"
+        git clone https://github.com/greshake/i3status-rust ${TARGET}
+        cd ${TARGET}
+        cargo install --path .
+        ./install.sh
+    )
+
 }
 
 main() {
     local cmd=$1
 
     if [[ -z "$cmd" ]]; then
-        echo "Usage: \n base (incl docker+compose)| desktop | server | dotfiles | vscode | latex | update-docker | go | rust"
+        echo "Usage: \n base (incl docker+compose)| i3 | sway | server | latex | update-docker | vscode | go | rust"
     fi
 
     case "$cmd" in
         base)
-            # apt_sources buster
             base_applications
             install_docker
             install_compose
             ;;
-        dotfiles)
-            get_dotfiles
-            ;;
         server)
             install_server_base
             ;;
-        desktop)
+        i3)
-            # apt_sources buster
             base_applications
-            install_docker
-            install_compose
             install_syncthing
             install_i3
             install_workstation_apps
-            if [ -f "./get_private_stuff.sh" ]; then
+            ;;
-                source get_private_stuff.sh
+        sway)
-            fi
+            base_applications
+            install_syncthing
+            install_sway
+            install_workstation_apps
             ;;
         latex)
             install_latex

sway/.bashrc

@@ -0,0 +1,79 @@
+# ~/.bashrc: executed by bash(1) for non-login shells.
+# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
+# for examples
+
+# If not running interactively, don't do anything
+case $- in
+    *i*) ;;
+    *) return;;
+esac
+
+# don't put duplicate lines or lines starting with space in the history.
+# See bash(1) for more options
+HISTCONTROL=ignoreboth
+
+# Load the shell dotfiles, and then some:
+# * ~/.path can be used to extend `$PATH`.
+# * ~/.extra can be used for other settings you don’t want to commit.
+for file in ~/.{aliases,bash_prompt,functions,path,extra,exports}; do
+	[[ -r "$file" ]] && [[ -f "$file" ]] && source "$file"
+done
+unset file
+
+# Case-insensitive globbing (used in pathname expansion)
+shopt -s nocaseglob
+
+# append to the history file, don't overwrite it
+shopt -s histappend
+
+# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
+HISTSIZE=1000000
+HISTFILESIZE=20000000
+
+export TERMINAL="alacritty";
+export TERM="alacritty";
+
+# check the window size after each command and, if necessary,
+# update the values of LINES and COLUMNS.
+shopt -s checkwinsize
+
+# If set, the pattern "**" used in a pathname expansion context will
+# match all files and zero or more directories and subdirectories.
+#shopt -s globstar
+
+# make less more friendly for non-text input files, see lesspipe(1)
+[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
+
+# set variable identifying the chroot you work in (used in the prompt below)
+if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
+    debian_chroot=$(cat /etc/debian_chroot)
+fi
+
+PS1="\[\e[01;36m\]\u\[\e[0m\]\[\e[00;37m\]@\[\e[0m\]\[\e[01;33m\]\h\[\e[0m\]\[\e[00;36m\][\w]\[\e[0m\]\[\e[01;31m\]\n\\$\[\e[0m\]\[\e[00;37m\] \[\e[0m\]"
+
+# If this is an xterm set the title to user@host:dir
+PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
+
+# enable color support of ls and also add handy aliases
+if [ -x /usr/bin/dircolors ]; then
+    eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
+    alias ls='ls --color=auto'
+    alias grep='grep --color=auto'
+    alias fgrep='fgrep --color=auto'
+    alias egrep='egrep --color=auto'
+fi
+
+# Add an "alert" alias for long running commands.  Use like so:
+#   sleep 10; alert
+alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'
+
+# enable programmable completion features (you don't need to enable
+# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
+# sources /etc/bash.bashrc).
+if ! shopt -oq posix; then
+    if [ -f /usr/share/bash-completion/bash_completion ]; then
+        . /usr/share/bash-completion/bash_completion
+    elif [ -f /etc/bash_completion ]; then
+        . /etc/bash_completion
+    fi
+fi

sway/.exports

@@ -0,0 +1,2 @@
+export MOZ_ENABLE_WAYLAND=1
+export QT_QPA_PLATFORM=wayland

sway/config

@@ -0,0 +1,281 @@
+# Default config for sway
+#
+# Copy this to ~/.config/sway/config and edit it to your liking.
+#
+# Read `man 5 sway` for a complete reference.
+
+# Logo key. Use Mod1 for Alt.
+set $mod Mod4
+
+font pango:DejaVu Sans Mono 8
+
+set $term alacritty
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+hide_edge_borders both # none|vertical|horizontal|both
+
+output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
+
+# start a terminal
+bindsym $mod+Return exec alacritty
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+for_window [app_id="^launcher$"] floating enable, sticky enable, resize set 30 ppt 60 ppt, border pixel 10
+set $menu exec $term --class=launcher -e /home/fschl/projects/sway-launcher-desktop/sway-launcher-desktop.sh
+bindsym $mod+d exec $menu
+
+# bindsym Ctrl+Shift+l exec i3lock-fancy
+
+input * {
+      xkb_layout "de"
+      xkb_variant "nodeadkeys"
+      xkb_options "ctrl:nocaps"
+}
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+# float some applications
+for_window [class="Tor Browser"] floating enable
+
+bindsym $mod+a focus parent # focus the parent container
+
+# manage workspaces
+# look for icons: https://fontawesome.com/icons?d=gallery
+# firefox - browser is placed on this Workspace
+set $WS1 "1 "
+# git - emacs <3
+set $WS2 "2 "
+# terminal - place for urxvt
+set $WS3 "3 "
+# envelope - thunderbird windows on here
+set $WS4 "4 "
+# code - eclise, intellij IDEs, etc
+set $WS5 "5 "
+# unlock-alt - keepassxc defaults here
+set $WS8 "8 "
+# linux - less often used terminals for background processes
+set $WS9 "9 "
+
+assign [class="^Firefox$"] $WS1
+assign [class="^Eclipse$"] $WS5
+assign [class="^Thunderbird$"] $WS4
+assign [class=".*ee.*ass.*"] $WS8
+
+# https://faq.i3wm.org/question/3726/workspace-output-multiple-values/index.html%3Fanswer=3731.html#post-id-3731
+set $LAPTOP LVDS-1
+set $CENTER HDMI-1
+set $RIGHT VGA-1
+
+# monitor settings
+bindsym $mod+m mode "monitor"
+mode "monitor" {
+    # only laptop
+    bindsym 1 exec xrandr --output $LAPTOP --auto --primary --output $CENTER --off $RIGHT --off
+    # HDMI main, laptop secondary
+    bindsym 2 exec xrandr --output $CENTER --primary --auto --output $LAPTOP --auto --left-of $CENTER --output $RIGHT --off
+    # HDMI main, laptop left, VGA right, *not* supported on X230
+    bindsym 3 exec xrandr --output $CENTER --primary --auto --output $LAPTOP --auto --left-of $CENTER --output $RIGHT --auto --right-of $CENTER
+    # HDMI main, VGA right, laptop off
+    bindsym 4 exec xrandr --output $CENTER --primary --auto --output $RIGHT --right-of $CENTER --rotate left --auto --output $LAPTOP --off
+    # VGA main, laptop left, HDMI off
+    bindsym 8 exec xrandr --output $RIGHT --primary --auto --output $LAPTOP --auto --left-of $RIGHT --output $CENTER --off
+    # HDMI main, VGA right, laptop off
+    bindsym 9 exec xrandr --output $CENTER --primary --auto --output $RIGHT --auto --right-of $CENTER --output $LAPTOP --off
+
+    # back to normal: Enter or Escape
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+    bindsym $mod+m mode "default"
+}
+
+bindsym $mod+p exec xrandr-toggle
+
+workspace $WS1 output $CENTER
+workspace $WS2 output $CENTER
+workspace $WS3 output $LAPTOP
+workspace $WS4 output $LAPTOP
+workspace $WS5 output $CENTER
+workspace $WS8 output $LAPTOP
+workspace $WS9 output $LAPTOP
+
+# switch to workspace
+bindsym $mod+1 workspace $WS1
+bindsym $mod+2 workspace $WS2
+bindsym $mod+3 workspace $WS3
+bindsym $mod+4 workspace $WS4
+bindsym $mod+5 workspace $WS5
+bindsym $mod+6 workspace 6
+bindsym $mod+7 workspace 7
+bindsym $mod+8 workspace $WS8
+bindsym $mod+9 workspace $WS9
+bindsym $mod+0 workspace 10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace $WS1
+bindsym $mod+Shift+2 move container to workspace $WS2
+bindsym $mod+Shift+3 move container to workspace $WS3
+bindsym $mod+Shift+4 move container to workspace $WS4
+bindsym $mod+Shift+5 move container to workspace $WS5
+bindsym $mod+Shift+6 move container to workspace 6
+bindsym $mod+Shift+7 move container to workspace 7
+bindsym $mod+Shift+8 move container to workspace $WS8
+bindsym $mod+Shift+9 move container to workspace $WS9
+bindsym $mod+Shift+0 move container to workspace 10
+
+set $WOBSOCK $XDG_RUNTIME_DIR/wob.sock
+exec mkfifo $WOBSOCK && tail -f $WOBSOCK | wob
+
+# audio controls
+bindsym XF86AudioRaiseVolume exec amixer sset Master 5%+ | sed -En 's/.*\[([0-9]+)%\].*/\1/p' | head -1 > $WOBSOCK
+bindsym XF86AudioLowerVolume exec amixer sset Master 5%- | sed -En 's/.*\[([0-9]+)%\].*/\1/p' | head -1 > $WOBSOCK
+bindsym XF86AudioMute exec amixer sset Master toggle | sed -En '/\[on\]/ s/.*\[([0-9]+)%\].*/\1/ p; /\[off\]/ s/.*/0/p' | head -1 > $WOBSOCK
+
+bindsym XF86MonBrightnessDown exec brightnessctl set 5%- | sed -En 's/.*\(([0-9]+)%\).*/\1/p' > $WOBSOCK
+bindsym XF86MonBrightnessUp exec brightnessctl set +5% | sed -En 's/.*\(([0-9]+)%\).*/\1/p' > $WOBSOCK
+
+
+# bindsym XF86AudioRaiseVolume exec amixer set Master 5+ #increase sound volume
+# bindsym XF86AudioLowerVolume exec amixer set Master 5- #decrease sound volume
+# bindsym XF86AudioMute exec amixer set Master 1+ toggle # mute sound
+# bindsym XF86AudioMicMute exec amixer set Capture toggle # mute mic
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+    # These bindings trigger as soon as you enter the resize mode
+
+    # Pressing left will shrink the window’s width.
+    # Pressing right will grow the window’s width.
+    # Pressing up will shrink the window’s height.
+    # Pressing down will grow the window’s height.
+    bindsym j resize shrink width 10 px or 10 ppt
+    bindsym i resize grow height 10 px or 10 ppt
+    bindsym k resize shrink height 10 px or 10 ppt
+    bindsym l resize grow width 10 px or 10 ppt
+
+    # same bindings, but for the arrow keys
+    bindsym Left resize shrink width 10 px or 10 ppt
+    bindsym Down resize grow height 10 px or 10 ppt
+    bindsym Up resize shrink height 10 px or 10 ppt
+    bindsym Right resize grow width 10 px or 10 ppt
+
+    # back to normal: Enter or Escape
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+# actually use the rust port https://github.com/greshake/i3status-rust
+bar {
+    colors {
+       background #223232
+       statusline #93b4a6
+       # focused_workspace #7d9683 #6c71c4 #fdf6e3
+       # active_workspace #fdf6e3 #6c71c4 #fdf6e3
+       # inactive_workspace #002b36 #586e75 #002b36
+       # urgent_workspace #d33682 #d33682 #fdf6e3
+    }
+
+    status_command ~/.cargo/bin/i3status-rs ~/dotfiles/sway/status-rust.toml
+    tray_output $LAPTOP
+
+    output $LAPTOP
+    output $CENTER
+    font pango:DejaVu Sans Mono, FontAwesome 8
+}
+
+bar {
+    # position top
+    colors {
+       background #323232
+       statusline #93b4a6
+       focused_workspace #7d9683 #6c71b4 #ede6b3
+       active_workspace #fdf6e3 #6c71b4 #ede6b3
+       # focused_workspace #7d9683 #6c71c4 #fdf6e3
+       # active_workspace #fdf6e3 #6c71c4 #fdf6e3
+       inactive_workspace #002b36 #586e75 #002b36
+       urgent_workspace #d33682 #d33682 #fdf6e3
+    }
+
+    status_command i3status --config ~/dotfiles/.i3/status.conf
+    tray_output $LAPTOP
+
+    # i3blocks: http://kumarcode.com/Colorful-i3/
+    #   status_command i3blocks -c ~/.i3/i3blocks.conf
+    output $LAPTOP
+    output $CENTER
+    font pango:DejaVu Sans Mono, FontAwesome 8
+}
+
+# bar {
+#     # output $CENTER
+#     output $RIGHT
+#     status_command i3status --config ~/.i3/status_small.conf
+#     tray_output $LAPTOP
+# }
+
+# startup programs
+# exec amixer set Master 1+ off
+# exec amixer set Master 54
+# exec --no-startup-id nm-applet
+# exec --no-startup-id xrandr --output LVDS1 --left-of VGA1 --auto
+# exec --no-startup-id xrandr --output VGA1 --auto
+# #exec --no-startup-id clipit
+# exec --no-startup-id i3-msg 'workspace $WS1; exec firefox;'
+# exec --no-startup-id i3-msg 'workspace $WS2; exec emacs'
+# exec --no-startup-id i3-msg 'exec thunderbird'
+# exec --no-startup-id i3-msg 'exec keepassxc'
+# # exec --no-startup-id i3-msg 'exec nextcloud'
+# exec --no-startup-id i3-msg 'workspace $WS3; exec urxvt;'
+

sway/status-rust.toml

@@ -0,0 +1,95 @@
+theme = "semi-native"
+# theme = "solarized-dark"
+icons = "awesome"
+
+[[block]]
+block = "pomodoro"
+length = 25
+break_length = 5
+message = "Take a break!"
+break_message = "Back to work!"
+notifier = "swaynag"
+
+[[block]]
+block = "disk_space"
+path = "/"
+info_type = "available"
+unit = "GB"
+interval = 20
+warning = 12.0
+alert = 8.0
+alert_absolute = true
+format = "{icon}/{available}"
+
+[[block]]
+block = "disk_space"
+path = "/home"
+info_type = "available"
+unit = "GB"
+interval = 20
+warning = 20.0
+alert = 10.0
+alert_absolute = true
+format = "{icon}/home {available}"
+
+# [[block]]
+# block = "docker"
+# interval = 2
+# format = "{running}/{total} | {images}"
+
+[[block]]
+block = "memory"
+display_type = "memory"
+format_mem = "{mem_used_percents}"
+format_swap = "{swap_used_percents}"
+
+[[block]]
+block = "cpu"
+interval = 5
+
+[[block]]
+block = "load"
+interval = 5
+format = "{1m}"
+
+[[block]]
+block = "net"
+device = "enp0s25"
+format = "eth {ip} {speed_down;K*b} {graph_down;K*b}"
+interval = 5
+
+[[block]]
+block = "net"
+device = "wlp3s0"
+format = "{ssid} {signal_strength} {ip} {speed_down;K*b} {graph_down;K*b}"
+interval = 5
+
+[[block]]
+block = "sound"
+format = "{volume}"
+show_volume_when_muted = true
+
+# [[block]]
+# block = "sound"
+# name = "Mic"
+# format = "{output_name} {volume}"
+# show_volume_when_muted = true
+
+[[block]]
+block = "battery"
+driver = "upower"
+format = "{percentage} {time}"
+
+[[block]]
+block = "networkmanager"
+on_click = "alacritty -e nmtui"
+interface_name_exclude = ["br\\-[0-9a-f]{12}", "docker\\d+"]
+interface_name_include = []
+ap_format = "{ssid^10}"
+
+
+[[block]]
+block = "time"
+timezone = "Europe/Berlin"
+interval = 5
+format = "%a %Y-%m-%d %R:%S"